Diamond View DV153 Specifications

DIAMOND VIEW DV153 Colour TFT LCD Monitor 15” (38.1 cm) LCD Panel Size

855 Windows Software Installation To get best performance with Windows 95, 98, Millennium Edition , 2000 or XP, you should use the Windows driver s

93. Click Next again and then click Continue. The driver and monitor colour profile will be installed. Click Finish to complete the installation. W

1066 Setting the Display Resolution Choosing The Best Resolution All Liquid Crystal Displays (LCDs) have a fixed or “native” resolution that is the

11Supported Graphics Modes and Refresh Rate Selection There is no need to choose the highest possible refresh rate when using an LCD monitor. It is n

12• When you shut Windows down you may see interference lines on your screen. This caused by the manner in which Windows controls the graphics card

1377 Adjusting the Monitor Picture Optimisation The easiest way to obtain an optimal picture is by using the AUTO button. This only works reliably i

Auto Exit Enter Auto Exit Enter Power Power: Turn the monitor on or off. AUTO: Automatically a

155. Check the current setting. Use < or > to tune the sampling clock to get the optimum picture. Look at the centre section of the test patte

1688 Security Lock Installation The Diamond View DV153 can be secured to your desk or any other fixed object with a Kensington lock security produ

1799 Frequently Asked Questions The image is blurred, how can I get the best quality picture? ♦ Read chapter 6, Setting the Display Resolution, and

18No image is displayed, what can I do? ♦ Check that the light (LED) next to the monitor’s power button is lit and is green in colour. If the LED is

191100 Specifications Model Diamond View DV153Display Characteristics Display Type 15“ active matrix Thin Film Transistor Liquid Crystal Display Vi

20Input Signal Line Frequency 31.47 - 60.02 kHz multi-frequency Image Frequency (Refresh Rate) 56.25 - 75.0 Hz Within the parameters detailed in cha

211111 Service Contacts If problems remain after checking this manual, please contact your place of purchase or contact: Australia Visit the Custome

Victoria and Tasmania 4 / 303 Burwood Hwy East Burwood, Vic, 3151 Telephone: (03) 9262-9899 Fax: (03) 9262-9850 Western Australia 5 / 329 Collier Ro

i Table of Contents 11 Important Safety Instructions ... 3 22 Features...

ii Copyright Notice Copyright 2002, Mitsubishi Electric Australia Pty. Ltd. All rights reserved. No part of this publication may be reproduced, transm

311 Important Safety Instructions Please read the following safety instructions before installing or cleaning your Diamond View monitor: 1. Unplug

422 Features Your Diamond View DV153 Monitor features: ♦ XGA (1024 x 768 pixel) Resolution LCD Panel ♦ High Brightness – 250 cd/m2 ♦ High Contra

533 Unpacking the Monitor Please check that the following items are included with your monitor. If they are missing or damaged, please contact your

644 Hardware Installation Your monitor is equipped with an automatic power supply with a voltage range from 100 to 240 Volts AC at a frequency of 50

4. Connect the monitor‘s power cord to an AC power socket. Please make sure, that you have easy access to the power socket so you can disconnect the